Installing the Leafy Warbler behind the glove box
Step 1
First ensure the car is safely parked, then unplug the vehicle charger and 12V battery.
Using a plastic pry tool, partially remove the dashboard side trim.

Step 2
Pull firmly downwards to remove the trim in the passenger footwell below the glove box.

Step 3
Undo the 4 T20 Torx screws below the glove box.

Step 4
Undo the 4 T20 Torx screws inside & above the glove box.
Step 5
With the glove box door closed, pull the entire assembly directly outwards toward the seat.
Unplug the lamp cable before fully removing the glove box.
Step 6
The VSP is located at the top right, with a single cable attached to its underside.
Unplug the VSP and plug the cable into your Leafy Warbler instead. Secure the Leafy Warbler in place with automotive tape or a zip tie.
Follow the above steps in reverse to reassemble the dashboard and complete your installation.